Semih Metals, located in Istanbul, Turkey, is a trusted manufacturer and supplier of high-quality metals. One of their commonly used products is the C35 Round Bar. Made from medium carbon steel, these round bars are strong, durable, and easy to work with. Semih Metals ensures that every C35 Round Bar meets international quality standards, providing consistent performance for industrial and mechanical applications. These bars are suitable for industries where toughness and reliability are important. Available in various sizes and lengths, C35 Round Bars are ideal for engineering, construction, and manufacturing purposes.
C35 Round Bars are made of medium carbon steel containing about 0.35% carbon, along with iron and small amounts of manganese. This composition gives the bars good strength, toughness, and wear resistance. They can also be heat treated to improve hardness and durability when required. C35 Round Bars have reliable tensile strength and can withstand pressure and mechanical stress without deforming. Semih Metals ensures each bar is produced with uniform quality and tested for consistent mechanical properties, making them suitable for a wide range of industrial and engineering applications.
|
Variant |
Cast |
Di |
Weldability |
C % |
Si % |
Mn % |
P % |
S % |
Cr % |
Ni % |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
|
C35E |
CC |
0.98 |
CEV 0.65max |
Min |
0.35 |
0.15 |
0.50 |
– |
0.015 |
– |
– |
|
Pcm 0.49max |
Max |
0.39 |
0.35 |
0.80 |
0.030 |
0.035 |
0.30 |
0.30 |
| Variant | Condition | Format | Dimension [mm] | Yield strength min [MPa] | Tensile strength [MPa] | Elongation A5[%] | Hardness | Impact (ISO-V) strengthmin |
|---|---|---|---|---|---|---|---|---|
| Rp0.2 * Reh, ** Rel | ||||||||
| C35E | +AR | Round bar | < 20 | 345* | 520-690 | 10 | < 230 HB | 0 °C 0 J (long) 0 |
| EN | C35 (1.0501) |
| DIN | C35, CM35 |
| BS | 970 070M36 |
| UNI | C35 |
| JIS | S35C |
Considerations for installing C35 Round Bar include ensuring proper alignment, adequate support, correct machining, and adherence to safety and load-bearing requirements.
Yes, C35 Round Bar can be welded, but it requires proper preheating and post-weld heat treatment to avoid brittleness. Using appropriate welding electrodes is also essential for achieving strong, durable welds.
C35 Round Bar is available in various sizes, typically ranging from 10 mm to 250 mm in diameter, with custom sizes available upon request.
C35 Round Bars are widely used in industries that need strong and reliable steel components. They are commonly used to make shafts, pins, bolts, gears, and other machinery parts. These bars are suitable for automotive, construction, and general engineering applications. Their ability to be heat treated makes them ideal for parts requiring extra hardness and wear resistance. Semih Metals provides C35 Round Bars that are easy to machine and form, making them suitable for both large-scale production and custom projects. Their strength and durability make them a preferred choice for many industrial applications.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Semih Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Istanbul, Turkey
Copyright 2024 Semih Metals. All rights reserved
